Description
Continuously adjustable clamping element made of alloyed tempered steel in forged, black galvanised design.
Complete with mounting kit 7600BFS.
Thrust piece in smooth and ribbed variant, optionally available.
Product Data
Size: 60
Max. load static: 60 kN
Thread size: M24
Slot size: 28 mm
Height range H: 8 - 102 mm
Dimension E: 63 - 180 mm
Length L: 203 mm
Weight: 8950 g
Application
1. Position carrier element on the tool table and secure with the specified tightening torque Md.
2. Move the clamp arm to the desired position.
3. Moving the adjusting screw clamps the workpiece.
Advantage
Low installation height
High clamping force of 22 - 60 kN
Height and length continuously adjustable
The very robust design enables quick and easy clamping
Elements easy to install
For use in T-slots 12 - 36 mm and/or grid plates M10, M12, M16, M18, M20, M24, M30
2 thrust piece variants
Note
The max. load may differ, depending on the manner of clamping and condition of the threads (lubrication).
To reduce the wear on the adjusting screw, we recommend the use of AMF screw compound no. 6339.
Use only the corresponding AMF mounting kit 7600BFS.
If the clamping element without T-slot nut DIN 508 is used, the tensile strength of the support plate must be at least 900 N/mm².
Sizes 30 M16 / 44 M18 / 60 M24 and 60 M30 are not suitable for use with no. 7600Z.