Version:
Display: Large sharp contrast illuminated 2.8 inch TFT display with double scale with viewing angle stability. With battery display and memory display. Torque and rotational angle both displayed at the same time.
Display: Peak and Track function modes.
Modes: Displaying torque, triggering torque, triggering rotational angle, triggering rotational angle with rotational angle monitoring, triggering rotational angle with torque monitoring. Up to 100 screw tightening profiles can be programmed. Recurrent screw tightening profiles can be summarised into a procedure (up to 10 procedures each with up to 10 screw tightening profiles). Screw tightening profiles and procedures can be programmed directly on the wrench.
Memory capacity: 1000 measurement values with timestamp (incl. date and time).
Data output: Available via USB-C. The data can the exported as a .csv file.
Password protection: available as protection against unauthorised access to the menu (master password) and for verifying screw-tightening cases and procedures. In addition, you can set that reworking a screw connection that has been performed incorrectly requires input of a password.
Warning signal outputs are haptic (vibration), visual (change of colour at the display, visible through 360° in any direction due to the LED ring with “traffic light function”) and acoustic (buzzer, beep sound). The pre-warning point can be configured individually. Haptic and acoustic warning signals can be disabled if desired.
Easy input of reference dimensions: For tools with a different pitch setting simply input the new pitch. No laborious calculations with formulae.
Protection class IP40
The 2-component handle of the torque / rotational angle wrench ensures specially good ergonomics and high torque transmission.
Resistant to oils, grease, fuel, brake fluid and Skydrol.
Languages: German, English, Spanish, Italian, French.
Factory settings: The wrench can be reset to the factory settings.
Display of the software version with serial number, load cycle counter and calibration date.
Calibration reminder: after number of load cycles.
Units of measure: Nm, lbfft, lbt·in.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
Torque: Clockwise ± 2 %, anticlockwise ± 3 %.
Rotation angle: ± 1° for the measurement range up to 100°, ± 1% for the measurement range 100° and beyond.