Technical Data:
Product type: Testing Pin
Version: double-sided, two measuring surfaces

Application: For testing holes and concentricity; as setting/calibration standards; for measuring distances between shafts/axes.
Production tolerance for all nominal diameters: +0.002/0mm
Maximum out-of-roundness measured between centers: 0.001mm
Maximum out-of-cylindricity measured between centers: 0.001mm
Maximum eccentricity of both nominal diameters for double-sided pins: 0.004mm
Maximum taper/conicity: 0.001mm
Usual diameter steps in catalogue range: 0.01 / 0.02 / 0.05 / 0.10 / 0.50mm

Dimensions:
Nominal diameter range: Dia.25-60.00mm
Length and measuring-length dimensions vary by diameter according to the catalogue table.

Remark:
Order configuration: ARA-No. + nominal diameter.