Description
Support leg of steel hollow section, 50 mm wide, with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads do not damage the floor. Cable slots permit routing of media cables and power cables. Support leg with electric power and compressed-air connection.

Supplied With
Support leg with two sockets and fastening materials, not wired. Includes safety one-hand coupling, quick-release coupling nominal value 7.2 and 3/8 inch connection thread, up to 10 bar.

Colour
Light grey RAL 7035, powder-coated.

Notes
Support legs without rear panel or cupboards require stabilising plates No. 927122 for stiffening. Height is measured to the underside of the worktop. Pre-assembled workbenches must be secured against tipping.

Technical Data
- Country / socket variant: DE
- Height: 800 mm
- Width: 50 mm
- Depth: 700 mm
- Suitable worktop depth: 750 mm
- Socket type: F
- Nominal voltage: 250 V
- Rated current: 16 A
- Compressed-air connection thread: 3/8 inch
- Maximum pressure: 10 bar
- Quick-release coupling nominal value: 7.2