Version:
PVC floor panel with two sides of positive and two sides of negative toothing. Smooth surface and dissipative underlayer with honeycomb structure. The floor system can be installed on hard floors and carpets with minimal preparation.

Technical Data:
Colour: Dark grey marbled
Discharge resistance: approx. 10^6 Ohm
Suitable for industrial trucks, pallet trucks and forklift trucks
Maximum total weight with hard tyres: 2.5 t
Maximum total weight with pneumatic tyres: 5 t
Static load: 50 kg/cm^2
Weight: 4.5 kg

Dimensions:
Length=60.8 cm
Width=60.8 cm
Thickness=10.5 mm

Installation:
The interlocking ESD floor tiles are laid loosely on the floor and firmly interlocked using a rubber hammer. For grounding, self-adhesive copper strip is laid in a grid approximately every 1.5 m below the panels and connected to ground via 1 MOhm resistance. A hole is drilled in a panel for the press stud supplied in the grounding kit. At least 2 grounding points are required per floor; for areas greater than 20 m^2 several grounding points are recommended. Grounding must be carried out professionally by a qualified electrician. If ramp edging is mitre-cut at corners, cutting waste must be considered when ordering.

Remark:
Ground the flooring using self-adhesive copper strip No. 972591 and grounding kit No. 972590; order separately. Connection of the grounding must be performed by a specialist.