Technical Data:
Series: CAP
Rivet Body Material: Stainless steel A2, Nr. 1.4301
Mandrel Material: Stainless steel
Head Type: Dome head
Grip Range: 2 - 4 mm
Hole Diameter: 3.3 mm
Shear Strength: 2000 N
Tensile Strength: 2200 N
Packaging Unit: A 500

Application:
Automotive
Electronics
Roofing trade

Dimensions:
Rivet Diameter D=3.2 mm
Rivet Length L=8 mm
Mandrel Diameter dm=1.9 mm
Max. Setting Head Diameter dk=6.5 mm

Remark:
Captive mandrel. Air- and watertight blind rivet head; a tight seal requires careful processing. Drill hole diameter should be as small as possible for best application performance. Test procedure according to DIN EN ISO 14589. Material surcharge will be added at a daily rate.
Reduced feed jaw life is to be expected.