Description
With 45deg left-hand helix, evacuates swarf in the cutting direction.

Product Data
Product type: Machine taper pin reamer
Tool material: HSS-E
DIN: 2179
Taper: 1:50
Tolerance: h9
Helix direction: Left-hand
Helix angle: 45deg
Nominal Dia. Dc: 5 mm
Dia. D3: 4.9 mm
Dia. D2: 6.36 mm
Lc: 73 mm
L: 122 mm
Dia. Ds: 6.3 mm
Feed (f), Steel <500 N: 0.1 mm/rev

Cutting Data
Alu plastics: 20
Alu: 20
Steel <500 N: 15
Steel <750 N: 10
Steel <900 N: 7

Application
On machines for tapered through holes.
The peeling twist requires removal of a thick chip; a pre-drilled hole must not be too large.
For taper pins to ISO 2339, 8736, 8737 (DIN 1, 7977, 7978), DIN 258 and 1447.

Recommendation
The pre-drilled hole is best produced using a straight shank taper pin drill No. 116310.