Technical Data:
Digital back-jaw edge to center calipers
Measure edge to hole center distance
Non waterproof
Resolution: 0.01mm/0.0005in
Automatic power off, move the digital unit to turn on power
Battery: CR2032
Made of stainless steel
Buttons: on/off, set, mm/inch, preset (+, -)
Range: 5-200mm/0.2-8in
Accuracy: +/-0.1mm

Dimensions:
L=310mm
Drawing dimensions (unlabeled)=34mm; 25mm; 18mm; dia.10mm

Remark:
Built-in wireless; receiver code 7315-2/3/6/7/8/9 is needed
Optional calibration standard code 1524-BLOCK