Technical Data:
Digital spline micrometer/snap gauge
Measure splined shafts, slots and keyways
Absolute encoder; original data remains after power off
IP65 dust/waterproof
Non-rotating spindle
Adjustable resolution: 0.0002mm/0.00001in, 0.001mm/0.00005in, 0.01mm/0.0005in
One turn of sleeve makes 5mm spindle feed
Measurement accuracy is not affected by use of sleeve
Press the fork; spindle retracts 3mm
Linear ball bearings designed for ten million times use
Carbide spindle and anvil
Measuring force: 7-10N
Customizable measuring force range: 2-12N
Small measuring force will reduce dustproof and waterproof level
Button functions: data output, tolerance, data preset, data hold, measuring direction change, max./min./TIR, power-off time, on/off, zero, mm/inch, adjust resolution
Tolerance alarm: over tolerance / over upper limit / over lower limit
Supplied with gauge blocks for zero setting except 0-25mm/0-1in
Power: rechargeable battery; 24 hours continuous working
Range: 25-50mm/1-2in
Accuracy: 2um
Repeatability: 1um
Type: B
Data connection: built-in wireless

Dimensions:
A=88mm
B=42mm
Sleeve diameter=dia.24mm
Spindle diameter=dia.6.5mm
Type B measuring face diameter=dia.3mm
Type B reference dimensions=10mm and 10mm

Remark:
Supplied with manufacturer inspection certificate
Built-in wireless; receiver code 7315-2/3/6/7/8/9 is needed