Description:
Cam levers with elastomer lock.

Material:
- Handle and thrust washer fibreglass reinforced plastic PA 66. Hinge pin stainless steel 1.4305. Stud and washer steel grade 5.8. Expanding bush PUR elastomer.

Version:
- Catalogue text states handles and thrust washer black
- hinge pins bright
- and also states screw, washer, locknut and thrust washer trivalent blue passivated. Source wording is retained because the thrust-washer finish statement is internally inconsistent.
- Function / Note: Actuating the handle causes the elastomer bush to expand and conform to the surrounding surface. The amount of expansion and therefore the clamping force can be adjusted by tightening or loosening the locknut. The thread lock in the nut ensures that the preset clamping force remains unchanged when the clamp is released.
- Application: Specified holding forces are not suitable for constant loads. Samples can be supplied for application testing.
- Dimensions / Performance: Clamp bore D: 14 mm
- D1: 18.1 mm
- B: 22 mm
- B1: 16 mm
- H: 14 mm
- H1: 23.2 mm
- H2: 12.85 mm
- H3: 12 mm
- A: 71.5 mm
- A1: 79.6 mm
- SW: 10 mm
- Clamping force, bore clamping (no permanent load): approx. 150 N
- Clamping force, plate clamping (no permanent load): approx. 60 N.