Technical Information:
- Application: swivel feet are modular and can be individually combined for machines, plants and office furniture.
- Modular design: a plate is combined with a threaded spindle or ball joint; any plate can be combined with any threaded spindle or ball joint.
- Minimum swivel-foot height is H = 22.5 mm independent of plate/spindle/ball-joint size.
- With threaded spindle: total height = L + L1 + 22.5 mm. With ball joint, length L is void.
- Thread range shown: M6-M24. Ball-joint thread range shown: M6-M8. Plate diameter range shown: 30-120 mm.
- Inclination angle of threaded spindle or ball joint: 40 deg.
- Assembly: knock the ball of the spindle/ball joint vertically into the plate with a plastic hammer; closed fastening holes can be punched out if floor/base fixing is required.
- For pre-assembled supply, add suffix "assembled" to the order number for the plate and spindle/ball joint.

Material:
- Plate die-cast zinc or stainless steel 1.4305. Damper plate PUR elastomere (Sylomer V12).

Version:
- Die-cast zinc plate, black powder-coated. Stainless steel plate, bright. Damper plate, grey, glued in, anti-slip. Temp. range -30 degC to +70 degC.

Note for ordering:
- If the swivel foot plate and the threaded spindle or ball joint are to be supplied assembled, please add the suffix "assembled" to the order number for the plate and the spindle or ball joint. (e.g. K0419.20601 and K0421.060151 assembled.)

Note:
- The load rating given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a surface pressure of 0.4 N/mm^2, at which the material achieves its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm^2 may occur. The damper plate absorbs vibrations and prevents the swivel foot slipping. Swivel feet consist of a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint. For matching threaded spindles see K0421. For matching ball joints see K0422. Load rating max. kN 7 / 5,9 / 4,8 0,062 7 / 5,9 / 4,8 0,212 7 / 5,9 / 4,8 0,433 7 / 5,9 / 4,8 0,614 Load rating max. kN 7 / 5,8 / 4,9 0,212 7 / 5,8 / 4,9 0,435 7 / 5,8 / 4,9 0,705 7 / 5,8 / 4,9 1,372

Dimensions / Technical Data:
- Material variant: stainless steel.
- D: 80 mm.
- D1: 68 mm.
- H: 25 mm.
- H1: 7 / 5,8 / 4,9 mm.
- Weight: 1,372 kg.