Material:
- Steel version: Foot high carbon steel. Ball element free-cutting steel. Stainless steel version: Foot and ball element stainless steel. Damper plate PUR elastomer (Sylomer V12).

Version:
- Steel version: Foot black oxidised. Ball element case-hardened and black oxidised. Stainless steel version: Bright. Anti-slip damper plate grey, glued in. Temp. range -30 degC to +70 degC.

Note:
- The load rating given in the table is a recommendation of the permanent static load to which the damping element should be used. This static load corresponds to a surface pressure of 0.4 N/mm^2 at which the material achieves its optimum absorption properties. It is taken into account that under dynamic loading an additional load of up to 0.6 N/mm^2 may occur. The damper plate absorbs vibrations and prevents the swivel foot slipping. For swivel feet without vibration absorption see article No. K0395.

Drawing reference:
- 1) damper plate 8 / 6,8 / 5,9 10 17 0,212 8 / 6,8 / 5,9 12 19 0,212 8 / 6,8 / 5,9 14 24 0,435 8 / 6,8 / 5,9 18 30 0,705 8 / 6,8 / 5,9 10 17 0,212 8 / 6,8 / 5,9 12 19 0,212 8 / 6,8 / 5,9 14 24 0,435 8 / 6,8 / 5,9 18 30 0,705

Dimensions / Technical Data:
- Main material: steel.
- D: 50 mm.
- D1: M16.
- D3: 40,5 mm.
- H: 40 mm.
- H1: 32 mm.
- H2: 7 mm.
- H3 by 0 / 0.4 / 0.6 N/mm^2: 8 / 6,8 / 5,9 mm.
- T: 14 mm.
- SW: 24 mm.
- Load rating: 0,435 kN.