Technical Information:
- Application: swivel feet are modular and can be individually combined for machines, plants and office furniture.
- Modular design: a plate is combined with a threaded spindle or ball joint; any plate can be combined with any threaded spindle or ball joint.
- Minimum swivel-foot height is H = 22.5 mm independent of plate/spindle/ball-joint size.
- With threaded spindle: total height = L + L1 + 22.5 mm. With ball joint, length L is void.
- Thread range shown: M6-M24. Ball-joint thread range shown: M6-M8. Plate diameter range shown: 30-120 mm.
- Inclination angle of threaded spindle or ball joint: 40 deg.
- Assembly: knock the ball of the spindle/ball joint vertically into the plate with a plastic hammer; closed fastening holes can be punched out if floor/base fixing is required.
- For pre-assembled supply, add suffix "assembled" to the order number for the plate and spindle/ball joint.

Material:
- Steel or 1.4305 stainless steel

Version:
- Steel trivalent blue passivated. Stainless steel, bright.

Note for ordering:
- If the threaded spindle and the plate are to be supplied assembled, please add the suffix "assembled" to the order number for the spindle and plate. (e.g. K0421.060151 and K0415.1030 assembled.)

Note:
- Swivel feet consist of a threaded spindle and a plate joined together. Any threaded spindle can be combined with any plate. The height of the complete swivel foot can be calculated from the length of the threaded spindle + height of hexagon + 22.5 mm. (Overall height of swivel foot = L + L1 + 22.5 mm) Depending on the version, threaded spindles can have a thread undercut in front of the hexagon.

Dimensions / Technical Data:
- Material variant: steel.
- D1: M10.
- L: 90 mm.
- L1: 7,5 mm.
- SW: 14 mm.
- Maximum load rating: 4,7 kN.