Technical Information:
- Application: levelling feet are modular and can be individually combined for machines, plants and office furniture.
- Modular design: levelling feet consist of a plate and threaded spindle; any plate can be combined with any threaded spindle.
- Minimum levelling-foot height is H = 30 mm.
- Total levelling-foot height = L + 30 mm.
- Thread range shown: M12-M20. Plate diameter range shown: 60-125 mm.
- Inclination angle of threaded spindle: 8 deg.
- Mounting: insert threaded spindle vertically into the plate and fasten from underneath with spacer ring, washer and screw; closed fastening holes can be punched out for floor fixing.
- For pre-assembled supply, add suffix "assembled" to the order number for the plate and spindle.

Material:
- Plates, thermoplastic, fibreglass reinforced. Anti-slip plate thermoplastic elastomer.

Version:
- Black.

Note for ordering:
- If the levelling foot plate and the threaded spindle are to be supplied assembled, please add the suffix "assembled" to the order number for the plate and spindle. (e.g. K0424.31251 and K0427.120661 assembled.)

Note:
- Levelling feet consist of a plate and a threaded spindle. Any plate can be combined with any threaded spindle. The anti-slip plate absorbs vibrations and prevents the levelling foot slipping. For matching threaded spindles see K0427.

Drawing reference:
- Form C with screw-on hole (closed), without anti-slip plate Form D with screw-on hole (closed), with anti-slip plate 44 18 45 25 48 18 49 25

Dimensions / Technical Data:
- Form: C.
- D: 175 mm.
- A: 135 mm.
- H: 45 mm.
- Maximum load rating: 25 kN.