Technical Information:
- Application: levelling feet are modular and can be individually combined for machines, plants and office furniture.
- Modular design: levelling feet consist of a plate and threaded spindle; any plate can be combined with any threaded spindle.
- Minimum levelling-foot height is H = 30 mm.
- Total levelling-foot height = L + 30 mm.
- Thread range shown: M12-M20. Plate diameter range shown: 60-125 mm.
- Inclination angle of threaded spindle: 8 deg.
- Mounting: insert threaded spindle vertically into the plate and fasten from underneath with spacer ring, washer and screw; closed fastening holes can be punched out for floor fixing.
- For pre-assembled supply, add suffix "assembled" to the order number for the plate and spindle.

Material:
- Steel or 1.4305 stainless steel

Version:
- Steel trivalent blue passivated. Stainless steel, bright.

Note for ordering:
- If the threaded spindle and the levelling foot plate are to be supplied assembled, please add the suffix "assembled" to the order number for the spindle and plate. (e.g. K0427.120661 and

Note:
- Levelling feet consist of a plate and a threaded spindle. Any plate can be combined with any threaded spindle. The height of the complete levelling foot is calculated from the length of the threaded spindle + 30 mm. (Total height of levelling foot = L + 30 mm) Load rating max. kN 22 7,7 22 7,7 22 7,7 22 7,7 22 14,5 22 14,5 22 14,5 22 14,5 22 14,5 22 24,3 22 24,3 22 24,3 22 24,3

Dimensions / Technical Data:
- Material variant: 1.4305 stainless steel.
- D1: M20.
- L: 150 mm.
- SW: 22 mm.
- Maximum load rating: 24,3 kN.