Description:
- Plastic hinge with detent.

Material:
- Hinge and caps fibreglass reinforced PA thermoplastic.
- Hinge pin stainless steel.

Version:
- Hinge and caps black.
- Pin bright.

Note:
- Detent mechanism holds a door or lid open at three different angles or tightly closed.
- Available with or without guide tabs for aluminium profile slots.
- The loading values are non-binding reference values without safety factors and do not constitute a legally binding assurance of properties.
- Load values were determined under laboratory conditions; suitability must be determined for the actual application.
- Mounting material, mounting method, weather conditions and wear can influence the load values.

Drawing Reference:
- Indexed positions: 175 deg, 85 deg and 95 deg.

Dimensions / Technical Data:
- A: 54 mm.
- A1: 17,75 mm.
- A2: 17,75 mm.
- A3: 27 mm.
- A4: 27 mm.
- B: 56 mm.
- Guide tabs: guide tabs for slot 8 mm.
- Fixed drawing dimensions: 20 mm; 10,5 mm; 8 mm; 3 mm; 10,2 mm; D 6,4 mm; 63 mm; 36 mm.
- F1: 400 N.
- F2: 350 N.
- Max. torque: 2 Nm.