Description:
- Die-cast zinc hinge with elongated holes.

Material:
- Die-cast zinc.
- Hinge pin stainless steel.
- Washer thermoplastic.

Version:
- Hinge black powder-coated.
- Pin bright.
- Washer black.

Note:
- Elongated holes enable easy horizontal adjustment.
- The loading values are non-binding reference values without safety factors and do not constitute a legally binding assurance of properties.
- Load values were determined under laboratory conditions; suitability must be determined for the actual application.
- Mounting material, mounting method, weather conditions and wear can influence the load values.

Drawing Reference:
- Opening angle: 180 deg.

Dimensions / Technical Data:
- A: 80 mm.
- B: 40 mm.
- Guide tabs: without guide tabs.
- Fixed drawing dimensions: 8 mm; 20 mm; 4,5 mm; 14 mm; 8 mm; 1,8 mm; 8,3 mm; 24 mm; 20 mm; 13 mm.
- F1: 1200 N.
- F2: 500 N.