Description:
- Compression latch with adjustable tongue gap.

Material:
- Housing and actuator die-cast zinc.
- Flat seal rubber.
- Tongue steel.

Version:
- Housing and actuator trivalent passivated.
- Wing-handle version powder-coated.
- Tongue electro zinc-plated.

Note:
- For doors and housings requiring high pressure on the seal.
- Right or left deployment; locking direction always clockwise.
- Vibration-proof, water and dust tight according to IP65.
- Order the desired tongue separately; every tongue can be combined with every housing.

Function:
- Turning actuator 90deg brings tongue into closed position; a further 90deg draws the tongue into the frame and increases pressure.
- Compression gap: 6 mm.
- Fastening nut is an earthing nut with teeth on one side.
- Offset tongue can be installed positive or negative.

Accessories:
- Key K0535.

Drawing Reference:
- Actuation a) square 8 mm; b) double lug 3 mm; c) double lug 5 mm; d) toggle.

Dimensions / Technical Data:
- Actuation: double lug 5 mm.
- H: 32 mm.
- SW: 27 mm.
- Panel cutout: Dia.22,2 mm / 20,2 mm.
- Housing/head diameter: Dia.30 mm.
- Maximum panel thickness shown: 18 mm.
- Reference cam dimension: 19 mm.
- Compression gap: 6 mm.
- Drawing reference lengths: 70 mm and 76 mm.