Description:
Removable locating pin, Form D with flattened locating section.

Application:
For repeatable location using a press-fit mounting diameter while allowing relief in one locating direction.

Features:
- Can be removed using a suitable extractor

Material:
- Tool steel

Finish / Version:
- Hardened and ground to 55-60 HRC

Dimensions:
- Form: D
- D h6: 12 mm
- D1 p6: 8 mm
- D3 / Extraction thread: M5
- L1: 13 mm
- L2: 12 mm
- L4: 4 mm
- B: 3.5 mm
- Perpendicularity reference: 0.015 mm to datum A
- Lead-in angle: 30deg
- Extraction cone angle: 60deg
- Surface finish reference: Ra 0.8

Notes:
Catalogue table uses paired Form B/Form D dimensions; only Form D applicable values are retained here.