Description:
UNILOCK 5-axis add-on clamping module, size 80 mm, without rotation lock.

Material:
- Body: Q&T steel.
- Clamping pin: mild steel.

Version:
- Body and clamping pin oxidised.
- Contact faces hardened and ground.

Application / Note:
- Used for raising basic modules and mounting bases.
- Optimum assembly height can be achieved by combining the basic module and add-on module according to the clamping situation.

Dimensions / Technical Data:
- H: 125 mm.
- SW: 6 mm.
- Maximum tightening torque: 15 Nm.
- Weight: 4.625 kg.
- Module interface diameter: Dia.80 mm.
- Drawing reference: 10 H7 centring feature and 8 mm reference.
- Height contact surface tolerance: H +0 / -0.006 mm.

System Technical Reference:
- Manual module system is self-locking after closing.
- Actuation torque: 15 Nm.
- Repeat accuracy with clamping pin Form A: <0.005 mm.
- Short-cone centring provides precise centring with radii to ease insertion.
- Clamping modules are generally not approved for turning applications.
- Temperature range: +5 degC to +60 degC.
- Retraction force at 15 Nm actuation torque: 15,000 N.
- Axial load: 30,000 N (3 t).
- Retraction travel: 0.5 mm.
- Tilt moment, single module: 400 Nm.
- Rotation moment, single module: 60 Nm.
- Lateral force without relative movement: 1,500 N; correct function/repeat accuracy guaranteed up to this value.
- Failsafe and personal safety assured up to critical lateral force of 14,000 N.

On Request:
With rotation lock.