Description:
UNILOCK manual clamping module H50 for machines with reduced Z travel; low installation height enables full utilisation of Z travel.

Application / Note:
- Can be mounted in any position.
- Clamping forces with UNILOCK clamping pin: M10 35,000 N; M12 50,000 N; M16 75,000 N.
- Clamping-force values apply with DIN EN ISO 4762 property class 12.9 cap screws.
- Clamping pins may only be clamped together with a mounted interchangeable unit.
- Can be fastened using DIN EN ISO 4762 property class 10.9 M12 or M16 cap screws.
- Positioning via two D1 alignment holes or the central D alignment hole.
- Two B1 positioning holes align interchangeable fixtures on the support surface.

Dimensions:
- B: 85 mm
- B1: 25 mm
- B2: 24.75 mm
- B3: 16.5 mm
- D: 12 mm
- D1: 20 mm
- D2: 13 mm
- D3: 17 mm
- H: 50 mm
- H1: 6.5 mm
- H2: 30 mm
- H3: 12 mm
- L: 125 mm
- L1: 100 mm
- L2: 24.3 mm
- SW: 6 mm
- Weight: 3.52 kg

Technical Data:
- Max. operating torque: 15 Nm
- Catalogue states max. retraction force: 15 Nm
- Repeat accuracy: <=0.005 mm

Supplied With:
1 manual clamping module including fastening accessories.