Description:
Pneumatic locating cylinder for rapid and precise positioning and clamping of grid plates.

Material:
Carbon steel.

Version:
Nickel-plated.

Function:
- The three clamping balls are pneumatically released.
- When released, the balls retract so that the fixture can be exchanged.
- When the air is stopped, the three clamping balls advance and the fixture is clamped.
- The easy-to-operate system is designed to significantly reduce changeover times.

Pneumatic Positioning And Clamping System:
- The system enables rapid and precise fixation and positioning of grid plates and consists of a locating cylinder and a locating bush.
- The locating cylinder is actuated pneumatically.
- Install two locating cylinders on the machine table or baseplate and the corresponding locating bushes with the interchangeable subplate in line with the specified dimensions.
- Feed air to open the locating-cylinder mechanism so the clamping balls move inward; insert the interchangeable subplate and close the air valve to position and clamp it.
- The system is clamped without an air supply by spring force.
- An air supply of 6 bar is required to open the mechanism.
- Published mounting guidance specifies spacing tolerance +/-0.02 mm.

Dimensions / Variant Data:
- Form: A.
- D: 12 mm.
- D1: 40 mm.
- D2: 24 mm.
- D3: 23.4 mm.
- D4: 4.5 mm.
- D5: 8 mm.
- D6: 32 mm.
- D8: 23.8 mm.
- D10: 41 mm.
- D11: M4.
- H: 8 mm.
- H1: 29.5 mm.
- H2: 8 mm.
- H3: 25 mm.
- H4: 3.5 mm.
- H5: 8.5 mm.
- H7: 8.5 mm.
- Retaining force F1: 250 N.