Description:
Floating clamp for simultaneous clamping and support of overhanging workpiece points.

Application:
Prevents vibration and deflection during machining.

Features:
- Exchangeable clamping jaw
- Height and swivel range adjustable
- Light spring contact before final clamping

Operation:
- Push the clamp down
- Pivot jaws to the stop so the lower jaw contacts the workpiece
- Tighten the SW18 nut; the workpiece is clamped and supported
- Reverse the process to release

Material:
- Base body and jaws: Steel
- Housing: Aluminium

Finish / Version:
- Body: Nitrided, black oxidised and ground
- Jaws: Nitrided and black oxidised
- Housing: Red anodised

Dimensions:
- Form: B
- Travel path: 72-80 mm
- Maximum clamping travel: 12 mm
- Clamping jaw width: 28 mm
- Clamping jaw height: 15 mm
- Body dimension: 21 mm
- Body dimension: 26.8 mm
- Main hexagon: SW 18
- Base hexagon: SW 46
- Clamp arm swivel angle: 110deg
- M8 ISO 4762 cap screw for clamping jaw
- Maximum top clearance: 21 mm
- Fixture fastening: M6 cap screw
- Base diameter: 80 mm
- Bolt circle / inner diameter: 65 mm
- Height / swivel adjustment: 4 x 2.5 mm grub screws
- Base height: 12 mm
- Angular hole pattern: 5 x 60deg

Load / Force Data:
- Load capacity: 8000 N
- Clamping force: 8000 N
- Tightening torque: minimum 15 Nm = 2 kN load; maximum 30 Nm = 8 kN load

Notes:
For Form A, the M12 tapped hole must always be closed for safe operation. Standard jaws may be modified or replaced for specific applications.