Material:
- Stainless steel 1.4401.

Version:
- Satin finished.

Note:
- Hinge for extreme loads. For right or left use. Opening angle 270 deg. Fastening with countersunk screws i.e. per DIN 7991. The loading values given for the hinges are non- binding reference values, which do not consider safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. These load values were determined under laboratory conditions. Each user must determine individually whether the hinge is suitable for the respective application. Wide differences in the materials on which the hinges are installed, the type of mounting, weather conditions and wear, can influence the determined values.

Drawing / Geometry Labels:
- K1341; D2 180 deg; H1; D1; 90; deg; B2; B3; A1 A2; A3 A4

Dimensions / Technical Data:
- A: 76 mm.
- A1: 28 mm.
- A2: 28 mm.
- A3: 38 mm.
- A4: 38 mm.
- B: 50 mm.
- B2: 30 mm.
- B3: 10 mm.
- D1: 6,5 mm.
- D2: 6 mm.
- H: 6 mm.
- H1: 11,5 mm.
- Load N: 5000.