Description:
Pneumatic swing clamp for clamping workpieces from above.

Application:
For unobstructed insertion and removal of workpieces. The universal housing foot enables flexible alignment and fastening.

Features:
- Pneumatic swivel and clamping function
- Suitable for manual or automatic control
- Multiple clamps can be operated in sequence
- Left-hand and right-hand versions available

Operation:
- Apply compressed air to the open port
- Manually swivel the arm into clamping position
- Set the thrust screw approximately to half the clamping travel from the workpiece
- Secure the thrust screw with locknuts

Material:
- Carbon steel

Finish / Version:
- Clamping element: Nickel-plated
- Clamping bolt: Tempered and nickel-plated

Dimensions:
- Swing direction: Left
- B: 85 mm
- B1: 20 mm
- B2: 13 mm
- B3: 64 mm
- D: 40 mm
- D1: 22 mm
- D2: 35 mm
- D3 / Thread: M10
- D4: 10.5 mm
- D5: 35 mm
- D6: 10.4 mm
- D7: 64 mm
- H: 106 mm
- H1: 65 mm
- H2: 22 mm
- H3: 57 mm
- H4: 15 mm
- H5: 11 mm
- H6: 101 mm
- H7: 8 mm
- L: 40 mm
- L1: 55 mm
- L2: 45 mm
- S1 / Clamping travel: 1.6 mm
- X minimum: 41.5 mm
- X maximum: 51 mm
- Y minimum: 44 mm
- Y maximum: 53.5 mm

Load / Force Data:
- Retaining force at 0.5 MPa: 650 N
- Holding force at 0.5 MPa: 1.3 kN
- Operating pressure: 0.3-0.7 MPa

Notes:
The clamping force and retaining force are based on 0.5 MPa. Performance curves show clamping force versus operating air pressure.