Description:
Tool-free mandrel collet with cam lever for joining and clamping two components.

Features:
- Form-fit positioning followed by frictional clamping
- Adjustable clamping range and holding force
- Suitable for blind holes
- Integrated disc-spring assembly generates positive down force

Operation:
- Insert the clamping system into the hole in the open state
- During locking, the mandrel collet expands and clamps in the lower component
- The disc springs pull the two components together

Material:
- Handle: Cast aluminium EN AC-46200
- Thrust washer: Fibreglass-reinforced PA 66 GF 35 X
- Hinge pin: Stainless steel
- Tie rod, washer, collet and disc spring: Steel

Finish / Version:
- Grip: Fine-structure powder-coated Black
- Thrust washer: Black
- Washer: Blue passivated
- Tie rod and collet: Black oxidised

Dimensions:
- A: 70.4 mm
- A1: 79.2 mm
- B: 21.5 mm
- D: 14 mm
- D1: 18.1 mm
- H: 14.5 mm
- H1: 22 mm
- H2: 35 mm
- H3: 14.7 mm

Load / Force Data:
- Hand force FH: 120 N
- Holding force F: 3.3 kN

Notes:
Values are guide values without a safety factor. The cam lever should preferably be vertical when the collet is positioned in the bore. Function was tested in H7-tolerance bores.