Description:
Baseplate for KIPPflexX 5-axis vice with versatile mounting and alignment interfaces.

Material:
Steel.

Version:
- Hardened and black oxidised.
- Contact faces ground.

Application / Features:
- Locating slots on the underside permit direct alignment on the machine table using slot keys.
- Fastening in 12F7 grid holes with 50 mm grid spacing is possible.
- Claw clamps or separate clamping devices can be located on the side recess.
- Suitable for standard zero-point clamping systems with centre distances of 52 / 96 / 200 mm.
- Integrated central hole can be used for alignment with a specific centring pin.

Note:
Additional product information is available in the manufacturer operating instructions.

On Request:
Other dimensions.

Dimensions / Technical Data:
- B: 90 mm
- H: 53 mm
- L: 280 mm
- L1: not specified for this variant
- L2: 250 mm
- H3: 5.5 mm
- H4: 18 mm
- H5: 6 mm
- H6: 11 mm
- D: 25H7
- D2: 12H6
- E: 52 mm
- G1: M12
- G2: M8
- Overall height tolerance: H +/-0.02 mm
- L1 tolerance: +/-0.01 mm where applicable
- L2 tolerance: +/-0.02 mm
- E tolerance: +/-0.01 mm
- Published drawing reference: 20 H7 locating slot
- Published drawing reference: Dia.20 mm
- Published drawing reference: Dia.12 F7 grid hole
- Published drawing reference: M6, 4 positions
- Published drawing reference: 18 mm, 10 mm, 35 mm, 25 +/-0.02 mm, 62 +/-0.02 mm
- Published grid / zero-point reference: 200 +/-0.02 mm on 400 mm length version
- Published slot depth/reference: t = 6.3 mm