Material:
- L +/-2 Wire cable stainless steel. Sheath, steel wire with inner and outer plastic coating. 1) Sleeve POM. Nipple Zamac. Screw nipple steel. D

Version:
- Bowden cable sheath and sleeve black. Screw nipple electro zinc-plated. L2 4) K1646.11X110500 6) 5)

Note:
- Bowden cables transfer the traction force and are used in combination with a release as a remote control. There are different lengths available to select from. The Bowden cable can be shortened as required during L4 installation to ensure a perfect fit in the respective L1 +/-1 application. Note the following points when installing Bowden 3) cables: The length of the free end of the cable can change due to layout angle, bend radius and load factors. When laying the cable, take particular care to ensure that the bend radius is not below the minimum value, which in this case is R = 65 mm. A too small radius

Drawing reference:
- can lead to increased wear and higher friction. During 1) Sleeve installation, avoid bending the cable more than the 2) Screw nipple minimum value as this can cause damage to the 3) Body 1x19 casing. Also, the casing is designed only to support 4) Nipple pressure forces. If pulled too sharply, the inner coil will 5) Sheath be stretched and permanently damaged. 6) Wire cable Tensile strength 1000 N max.

Supplied with:
- Wire cable with nipple, sheath, sleeve and screw nipple.

Accessories:
- Remote release K1481.

Drawing / Fixed Dimensions:
- K1646; L +/-2 Wire cable stainless steel.; 1) Sleeve POM.; D1 +/-0,2; D3 +/-0,2; D4; 2); L2 4) K1646.11X110500; 6) 5); L3; Dia. D2; B1 +/-0,2; B +/-0,2; L4 installation to ensure a perfect fit in the respective; L1 +/-1 application.; which in this case is R = 65 mm. A too small radius; 1) Sleeve installation, avoid bending the cable more than the; 2) Screw nipple minimum value as this can cause damage to the; 3) Body 1x19 casing. Also, the casing is designed only to support; 4) Nipple pressure forces. If pulled too sharply, the inner coil will; 5) Sheath be stretched and permanently damaged.; 6) Wire cable; Tensile strength 1000 N max.; Remote release K1481.; 5); 1); 6); 4)

Dimensions / Technical Data:
- B: 7 mm.
- B1: 8 mm.
- D: 1,5 mm.
- D1: 5 mm.
- D2: 9 mm.
- D3: 5 mm.
- D4: 4,8 mm.
- L: 500 mm.
- L1: 464,4 mm.
- L2: 19,5 mm.
- L3: 2,5 mm.
- L4: 2,5 mm.