Material:
- Slides steel. Ball cages steel. Balls, steel.

Version:
- Slides electro zinc-plated. Ball cages, electro zinc-plated. Balls hardened. 1 Pair (latching both sides): K1719.****0 (left) & 1 Pair (latching one side): K1719.****0 (left) or

Note for ordering:
- Sold individually.

Note:
- By telescopic slides with full extension, the travel is roughly equal to the installed length, which ensures greater comfort and accessibility. Latches in open and closed positions. The telescopic slides can only be opened or closed after the release lever has been actuated. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacities specified refer to the maximum value for 10,000 cycles. Not suitable for horizontal mounting. The head height of the fastening screws should not exceed 4,8 mm otherwise there is a risk of collision with other parts of the slide. These telescopic slides cannot be ordered as a pair. If double sided latching is desired, a left and a right version must be ordered. If single sided latching is desired, a combination with K1720 is possible.

Advantages:
- Latches in open and closed positions For heavy duty use Manual release Light running

Accessories:
- Steel telescopic slides K1720.

Attention:
- The maximum load rating refers to a pair of telescopic slides.

Dimensions / Technical Data:
- Catalogue variant data: B right side mounting standard 272 packaged individually.
- A: 12,7 mm.
- A1: - mm.
- A2: - mm.
- A3: - mm.
- A4: 254 mm.
- A5: 311,2 mm.
- A6: 330,2 mm.
- A7: - mm.
- A8: - mm.
- A9: - mm.
- A10: - mm.
- A11: - mm.
- A12: - mm.
- A13: - mm.
- A14: 204,7 mm.
- A15: 230,1 mm.
- A16: 249,2 mm.
- B: 19,1 mm.
- H: 76,2 mm.
- Travel: 355,6 mm.
- L: 355,6 mm.