Description:
Flange stainless steel pneumatic locating adapter.

Function:
- Clamped using compressed air.
- If the pressure fails, tension is retained by a spring.
- A spring force of 6 N must be overcome to release the positioning adapter using compressed air.

Material:
- Body: stainless steel.
- Seal: NBR.

Version:
Stainless steel, bright.

Supplied / Not Supplied:
- M3x28 cap screws for fastening from below are supplied.
- M4 cap screws for fastening from above are not supplied.

Technical / Installation Notes:
- Installed dimensions are for a 6 mm thick plate.
- The stated clamping and retaining forces relate to an operating pressure of 0.5 MPa.
- When using several positioning units, the distance tolerance of +/-0.1 mm should not be exceeded.
- Repeat accuracy: +/-0.2 mm.

Accessories:
Clamping pins K1564.

Drawing Reference:
- 1) Clamping connection.
- 2) Release connection.
- 3) M3 cap screw.
- 4) M4 cap screw.
- 5) Clamping pin.
- 6) Locating fixture.

Dimensions / Variant Data:
- B: 23 mm.
- B1: 17 mm.
- B2: 4 mm.
- B3: 4 mm.
- B4: 6 mm.
- D: 6 mm.
- D1: M4.
- D2: 18 mm.
- D3: M3.
- D4: M3.
- D5: 3.3 mm.
- H: 5.5 mm.
- H1: 23 mm.
- H2: 26.5 mm.
- H3: 8 mm.
- H4: 11 mm.
- H5: 8 mm.
- L: 27.5 mm.
- L1: 16 mm.
- L2: 12 mm.
- L3: 7 mm.
- Operating pressure: 0.3-0.7 MPa.
- F, clamping force: 40 N.
- F1, retaining force (spring-loaded): 6 N.
- Holding force: 100 N.