Description:
Clamping rail for multi-clamping system.

Material:
Tool steel.

Version:
Hardened and ground, HRC 55 +/-2.

Mounting / Note:
- Lateral edge permits clamping using claw-clamp sets at any desired position.
- Holes are provided for DIN cap screws.
- Dia.25 H6 mm locating holes suit conventional zero-point clamping systems with 100 mm system spacing.
- Dia.16 H6 mm locating holes suit zero-point clamping systems with 96 mm system spacing.
- Three 18 H7 alignment slots permit alignment on T-slot tables.
- Dia.12 F7 and Dia.16 F7 reamed holes suit 40 mm and 50 mm grid systems.

Application:
- Clamping rails of different lengths can be mounted one behind another or next to each other.
- Precision toothing enables accurate positioning of fixed jaws.
- The lateral scale allows each fixed-jaw position to be documented and reset identically.
- Stops can be mounted in the tapped holes on the side.

Advantages:
- Universal and flexible.
- Suitable for small and large batch sizes.
- Large components can be clamped across several clamping rails.

Dimensions / Variant Data:
- Suitable system width: 50 mm
- L: 300 mm
- B: 50 +/-0.01 mm
- H: 50 +/-0.01 mm
- L1: 96 +/-0.02 mm
- L2: 200 +/-0.02 mm
- L3: not applicable
- L4: not applicable
- L5: not applicable
- L6: not applicable
- L7: 1.5 +/-0.005 mm
- L8: 0.5 mm
- B1: 28 mm
- B2: 19 mm
- B3: 36 mm
- B4: 18 H7 mm
- H1: 10 mm
- H2: 22 mm
- H3: 10 mm
- H4: 10 mm
- H5: 16 mm
- D: 25 mm
- D1: 12 F7 mm
- D2: 20 mm
- D3: 16 H6 mm
- D4: 17.5 mm
- D5: 11 mm
- Alignment slot: 18 H7
- Lateral scale graduation: 3 mm