Description:
Double-acting pneumatic swing clamp with block body.

Application:
For low-force clamping where the clamping point must be cleared to place or remove the workpiece.

Features:
- Double-acting pneumatic operation
- 90deg swing movement followed by linear down-clamping travel
- Magnetic piston prepared for electronic end-position feedback
- Left-hand and right-hand versions

Operation:
- Pressure moves the piston downwards and upwards
- At the start of clamping, the arm swings 90deg
- After swinging, the linear down-clamping travel occurs

Material:
- Body: Aluminium
- Piston: Steel

Finish / Version:
- Body: Silver anodised
- Piston: Hard chrome-plated

Dimensions:
- Size: 12
- Form: A
- Swing direction: Left
- A: 20 mm
- B: 5 mm
- B1 maximum: 4.9 mm
- B1 minimum: 4.8 mm
- B2: 4.5 mm
- B3: 7.5 mm
- D maximum: 11.5 mm
- D minimum: 11.42 mm
- D1: 6 mm
- D2 / Air connection: M5
- D3 / Clamping-arm thread: M3x0.5
- H: 100 mm
- H1: 77.8 mm
- H2: 12 mm
- H3: 51 mm
- H4: 2 mm
- H5: 2.5 mm
- H6: 3 mm
- L: 25 mm
- L1: 15.5 mm
- L2: 8 mm
- Swing travel S1: 7.5 mm
- Clamping travel S2: 10 mm
- Total travel S: 17.5 mm

Load / Force Data:
- Clamping force F1 at 6 bar maximum permitted operating pressure: 59 N

Accessories:
- K1813 clamping arm
- Proximity switch available on request

Notes:
The swing clamp must not be constrained during swinging. Clamp the workpiece only during the linear clamping travel. Operate only with lubricated air. The clamping arm is not supplied.