Description:
Multi-clamping system with single-sided wedge clamps and ES fixed jaw, smooth jaw-face version.

Material:
- Clamping rail and fixed jaw: tool steel.
- Wedge clamp: mild steel.

Version:
- Clamping rail and fixed jaw hardened and ground, HRC 55 +/-2.
- Wedge clamp hardened and phosphated.

Mounting / Note:
- Multi-clamping system can be fastened using several interfaces.
- Lateral clamping edge accepts a clamping claw set; claw clamps can be positioned as required.
- Holes provided for DIN cap screws.
- Dia.25 mm locating holes for conventional zero-point clamping systems with 200 mm spacing.
- Dia.16 mm locating holes for zero-point clamping systems with 96 mm spacing.
- Three 18H7 alignment slots allow crosswise and lengthwise alignment on T-slot tables.
- Dia.12F7 and Dia.16F7 reamed holes support 40 mm and 50 mm grid systems.
- System variants comprise K1828 double-sided wedge clamp with ES fixed jaw, K1829 double-sided wedge clamp with DS fixed jaw, and K1830 single-sided wedge clamp with ES fixed jaw.

Application:
- Multiple systems with different lengths can be mounted one behind another or beside each other.
- Precision toothing permits highly accurate fixed-jaw positioning.
- Lateral graduations allow each fixed-jaw position to be documented and reset identically.
- Stops can be mounted in the tapped holes on the side.
- Turning the clamping screw moves the clamping segments outward and presses the workpiece against the fixed jaw.

Advantages:
- Universal and flexible.
- Suitable for small and large batch sizes.
- Large components can also be clamped next to each other across several multi-clamping systems.

Supplied With:
- 1x clamping rail.
- 3x single-sided wedge clamps.
- 1x fixed jaw ES.

Accessories:
- Clamping pin K0967.
- Cap screws K0869.10X30.
- Cap screws K0869.12X25.
- Shoulder screws K0815.12045 / K0815.16055.
- Seating ledges K1752.
- Attachment jaws with machining allowance K1753.
- Attachment jaws with prism K1754.
- Workpiece stop K1755.
- Spacer K1756.
- Clamping claw set K1757.
- T-slot nut K1758.
- T-slot key K0954.

Dimensions / Variant Data:
- Jaw face: smooth.
- L: 400 mm
- B: 50 mm
- H: 75 mm
- Clamping length min.: 64 mm
- Clamping length max.: 70 mm
- L1: 96 mm
- L2: 200 mm
- L3: 288 mm
- L4: 300 mm
- L5: not applicable
- L6: not applicable
- L7: 30 mm
- D: 25 mm
- D1: 12 mm
- D2: 20 mm
- D3: 16 mm
- D4: 17.5 mm
- D5: 11 mm
- D6: M5
- D7: M6
- H1: 50 mm
- H2: 25 mm
- H3: 12 mm
- H4: 16 mm
- F socket head screw DIN 912: M10x30
- G cap screw DIN 912: M12x25
- Z cap screw DIN 912: M12x30
- Drawing references include 18 H7 alignment slots and lateral scale graduations at 3 mm intervals.