Description:
Double-acting screw-in hydraulic cylinder usable as a thrust or traction cylinder.

Application:
For fixture plates and plastic injection-moulding tool plates requiring compact, cyclic linear movement.

Features:
- Power-actuated extension and retraction
- Integrated metal wiper
- Lineless pressure supply through drilled channels

Operation:
- Drilled-channel hydraulic actuation
- Observe specified installation depth because the mounting-hole bottom acts as the return-stroke stop

Material:
- Housing and piston: Steel
- Seal: NBR

Finish / Version:
- Housing: Black oxidised
- Piston: Hardened

Dimensions:
- Piston diameter: 20 mm
- Travel: 32 mm
- D: 26 mm
- D1: 28 mm
- D2: 12 mm
- D3: 4.2 mm
- G / Mounting thread: M36x1.5
- G1 / Piston thread: M8x16
- H: 73 mm
- H1: 67 mm
- H2: 12 mm
- H3: 25 mm
- H4: 43 mm
- H5: 25 mm
- H6: 10 mm
- H7: 40 mm
- L: 28 mm
- Hexagon SW: 10 mm

Load / Force Data:
- Compressive force at 100 bar: 3.14 kN
- Tractive force at 100 bar: 2.02 kN
- Compressive force at 500 bar: 15.7 kN
- Tractive force at 500 bar: 10 kN

Technical Data:
- Maximum operating pressure: 500 bar
- Oil requirement per 10 mm travel: 3.14 cm^3
- Oil requirement per 10 mm return stroke: 2.02 cm^3

Accessories:
- K0307 rest pads
- K0282, K0302, K1164, K0287 and K0288 self-aligning pads
- K0386 hexagonal gripper screws

Notes:
No internal piston return-stroke stop is installed. Ensure drilled channels are clean and lead-in chamfers and transverse holes are rounded to prevent seal damage. Thrust pieces are not supplied.