Description:
Double-acting screw-in hydraulic cylinder usable as a thrust or traction cylinder.

Application:
For fixture plates and plastic injection-moulding tool plates requiring compact, cyclic linear movement.

Features:
- Power-actuated extension and retraction
- Integrated metal wiper
- Lineless pressure supply through drilled channels

Operation:
- Drilled-channel hydraulic actuation
- Observe specified installation depth because the mounting-hole bottom acts as the return-stroke stop

Material:
- Housing and piston: Steel
- Seal: NBR

Finish / Version:
- Housing: Black oxidised
- Piston: Hardened

Dimensions:
- Piston diameter: 40 mm
- Travel: 50 mm
- D: 53 mm
- D1: 55 mm
- D2: 25 mm
- D3: 5.2 mm
- G / Mounting thread: M64x2
- G1 / Piston thread: M16x27
- H: 103 mm
- H1: 93 mm
- H2: 16.5 mm
- H3: 30 mm
- H4: 49 mm
- H5: 30 mm
- H6: 16 mm
- H7: 46 mm
- L: 50 mm
- Hexagon SW: 22 mm

Load / Force Data:
- Compressive force at 100 bar: 12.57 kN
- Tractive force at 100 bar: 7.66 kN
- Compressive force at 500 bar: 62.8 kN
- Tractive force at 500 bar: 38.3 kN

Technical Data:
- Maximum operating pressure: 500 bar
- Oil requirement per 10 mm travel: 12.57 cm^3
- Oil requirement per 10 mm return stroke: 7.66 cm^3

Accessories:
- K0307 rest pads
- K0282, K0302, K1164, K0287 and K0288 self-aligning pads
- K0386 hexagonal gripper screws

Notes:
No internal piston return-stroke stop is installed. Ensure drilled channels are clean and lead-in chamfers and transverse holes are rounded to prevent seal damage. Thrust pieces are not supplied.