Description:
Single-acting screw-in hydraulic cylinder with spring return.

Application:
For compact clamping arrangements where cylinders must be positioned closely and may operate without an opposing clamping face.

Features:
- Internal stroke limitation
- Double wipers reduce dynamic leakage
- Integrated return spring
- Can withstand maximum loads in tensioned and untensioned states
- Lineless pressure supply

Operation:
- Drilled-channel hydraulic actuation
- Spring returns piston to initial position

Material:
- Housing and piston: Steel
- Seal: NBR

Finish / Version:
- Housing: Black oxidised
- Piston: Hardened

Dimensions:
- Form: C
- Piston diameter: 12 mm
- Travel: 10 mm
- D: 6 mm
- G / Mounting thread: M22x1.5
- H: 45.5 mm
- H1: 27 mm
- H2: 7 mm
- H3: 10.5 mm
- H8: 15 mm
- H9: 6 mm
- H10: 26.5 mm
- L: 31 mm
- Hexagon SW: 24 mm

Load / Force Data:
- Clamping force at 100 bar: 1.1 kN
- Clamping force at 400 bar: 4.5 kN
- Minimum spring return force: 30 N

Technical Data:
- Maximum operating pressure: 400 bar
- Oil requirement per 10 mm travel: 1.13 cm^3
- Maximum tightening torque: 40 Nm

Accessories:
- Form B: K0307 rest pads
- Form B: K0282, K0302, K1164, K0287 and K0288 self-aligning pads
- Form B: K0386 hexagonal gripper screws

Notes:
A sealing ring at the bottom of the screw-in hole seals the cylinder. No rod-space venting is required due to the plunger design. Protect from aggressive cutting and cooling agents. Form B thrust pieces are not supplied.