Application:
Puller with hydraulic lift cylinder for hydraulically pressing out ball pins when removing ball joints on tie rods and steering rods of trucks and low-floor buses. A hydraulic pump is required.

Benefits:
Hydraulic cylinder enables controlled and safe operation.
Extra-powerful base body and reinforced fork for heavy trucks and low-floor buses.
Center spindle allows adjustment and pre-tensioning.
Suitable for Mercedes-Benz ACTROS, ATEGO from 18t, SKO 405/-N/-GN; MAN F2000, TG, A23; Scania series 3 and 4; Icarus.
Mechanical drive spindle can be operated from above or below after conversion, depending on space.

Technical Data:
GTIN=-000317
Maximum tensile force=100kN
Maximum tension force=10t (11.02US t. sh.)
Maximum operating pressure=700bar
Weight=7,65kg (16.868lb)

Dimensions:
Catalogue dimension 1=28,5mm (1 1/8in)
Catalogue dimension 2=55mm (2 3/16in)
Catalogue dimension 3=6mm (1/4in)
Catalogue dimension 4=120mm (4 3/4in)