Application:
Pulling device used together with Series 18 pullers for separating and pulling ball bearings, roller bearings, inner rings and other flush-seated parts when there is insufficient space for conventional puller jaws. The separating knives first move behind the component so it can then be pulled externally.

Benefits:
Sharp separating edges enable extraction where other extraction methods are not applicable
Bolting the separating and pulling devices together provides maximum stability during pulling
Separating jaws can be mounted in reverse to enlarge the support surface for gentler removal

Technical Data:
Thread=G3/4-14
Weight=18.05kg (40.793lb)

Dimensions:
Separating range=30 - 250mm (1 3/16 - 9 13/16in)
Catalogue dimension 2=338mm (13 5/16in)
Catalogue dimension 3=52mm (2 1/16in)
Catalogue dimension 4=440mm (17 5/16in)
Catalogue dimension 5=116mm (4 9/16in)
Catalogue dimension 6=2mm (1/16in)
Catalogue dimension 7=14mm (9/16in)
Catalogue dimension 8=70mm (2 3/4in)
Catalogue dimension 9=46mm (1 13/16in)

Compatible Puller / Device:
18-5
18-5-B

Included in the Set:
15-E