Technical Data:
Series: 511
Product type: ABSOLUTE Digimatic Bore Gage
Position detection: ABSOLUTE electrostatic linear encoder
Sampling frequency: 50 times/sec
Protection rating: IP53
Measuring force: 5 N or less
Guide force: 10 N or less
Power source: 2 x SR44 batteries, 938882 included as standard for operational checks
Battery life: Approx. 9 months under normal use

Functions:
Preset function
Master value registration: Maximum 3 values
Tolerance judgment
Upper/lower limit registration: Maximum 3 values
Minimum value hold
Data output
Display rotation: 320 deg
Display inclination: 90 deg, 7 steps
Low-battery alarm
Error display
ABSOLUTE system: No overspeed error

Optional:
Extension rod 21DZA089: 250 mm / 10 in
Extension rod 21DZA081: 500 mm / 20 in
Up to four extension rods may be joined, maximum extension length 2 m
264-020 USB Input Tool IT-020U
905338 Connecting Cable, 1 m
905409 Connecting Cable, 2 m
06AFM380F USB Input Tool Direct, 2 m
264-622 Transmitter, IP67
264-626 Transmitter, IP67 Bluetooth
264-623 Transmitter, Buzzer
264-627 Transmitter, Buzzer Bluetooth
02AZD790F Connecting Cable
02AZE140F Connecting Cable, foot-switch compatible
Connector type: F

Optional:
For 511-501 / 511-521 only:
516-118-10 Rectangular Gage Block Set
516-118-60 Rectangular Gage Block Set with calibration certificate
516-119-10 Square Gage Block Set
516-119-60 Square Gage Block Set with calibration certificate
Measuring range: 100 - 160 mm
Contact-point stroke: 1.2 mm
Resolution: 0.001 mm
Wide-range accuracy: 0.003 mm or less
Adjacent error: 0.002 mm or less
Repeatability: 0.002 mm or less
Net weight: 570 g

Content:
Standard anvils, 13 pcs.:
21DZA232A through 21DZA232P
Indicated measuring sizes: 100, 105, 110, 115, 120, 125, 130, 135, 140, 145, 150, 155, 160 mm
Equivalent inch indications: 4.0, 4.2, 4.4, 4.6, 4.8, 5.0, 5.2, 5.4, 5.6, 5.8, 6.0, 6.2, 6.4 in
L1 values: 15 to 75 mm in 5 mm steps
L14 values: 5.5 to 65.5 mm in 5 mm steps
Interchangeable washers:
205457: 0.5 mm / 0.02 in
205458: 1.0 mm / 0.04 in
205459: 2.0 mm / 0.08 in
205460: 3.0 mm / 0.12 in

Dimensions:
Display rotation=320 deg
Display inclination=90 deg
Main body reference overall dimension=(339.5) mm
Reference dimensions=29.4 mm; 34 mm; 150 mm; 100 mm; 30 mm; 28 mm; 17 mm; 55.5 mm; 46.4 mm
Reference diameters=Dia.30 mm; Dia.22 mm; Dia.61 mm
Measuring face radius=SR2, hardened steel
Extension-rod interface=M26x1.5
Optional extension rod geometry:
Nominal length=250 mm or 500 mm
Reference length=232 mm or 482 mm
Overall reference length=268.5 mm or 518.5 mm
Rod Dia.=28 mm
Reference dimensions=28 mm; 20 mm; 16.5 mm; 1.5 mm