Technical Data:
Series: 513
Type: Pocket Type Dial Test Indicator
Unit system: Inch
Set type: Full Set
Graduation: 0.001 in
Range: 0.04 in
Dial reading: 0-20-0
Accuracy: +/-0.001 in
Hysteresis: 0.0002 in
Repeatability: +/-0.0004 in
Mass: 50 g
Measuring force: 0.3 N or less
Feature: Compact
Feature: Carbide contact point

Content:
Indicator
Spanner
Stem, 0.375 inch DIA.
Inch holding bar 900306 (L: 4 in)
Dia.2 mm carbide contact point (standard)
0.039 inch DIA. carbide contact point
0.118 inch DIA. carbide contact point
Stem, 0.157 inch DIA.
Swivel clamp 900322 (for 0.157 inch DIA. stem, 0.375 inch DIA. stem and dovetail)

Application:
Slim pocket-type body is suitable for measurements in shallow spaces and for reaching deep measuring points.

Dimensions:
Contact point length shown: 0.91 in
Face diameter: Dia.29.2 mm
Metric stem/body mounting diameter: Dia.8 mm (0/-0.03 mm)
Body mounting diameter: Dia.9.52 mm / Dia.0.375 in (0/-0.03 mm)
Drawing dimensions: 55 mm, 51.5 mm, 34.2 mm, 33.7 mm, 25.5 mm, 19 mm, 17 mm, 13.7 mm, 8 mm, 0.6 mm
Contact point sphere: S Dia.2 mm

Remark:
Clutch type with clutch lever. Contact point length is printed on the dial face. Attaching a contact point of incorrect length can cause measurement failure. The bezel and crystal are bonded to resist cutting-fluid or oil penetration to the dial face; this type is not waterproof. After exchanging the contact point, calibration with a reference gage or equivalent is required. A slight dimensional difference may occur depending on contact-point center, graduation plate and stem fixing position.