Technical Data:
Series: 543
Model: ID-CJX Signal Output Function Type
Standard type: ASME/ANSI/AGD
Back: center-lug
Range: 0.5 in / 12.7 mm
Resolution: 0.00005/0.0001/0.0005 in; 0.001/0.01 mm selectable
Accuracy: +/-0.00010 in
Hysteresis: 0.00010 in
Repeatability: 0.00010 in
Measuring force: 2.5 N or less
Mass: 295 g

Functions:
Signal output: -NG / OK / +NG, N-channel open drain; logical invert available
Remote control: peak start and preset/zero-set
Peak detection MAX/MIN
Runout range MAX-MIN
Zero-setting INC
Preset ABS
Measuring direction switching
Tolerance judgment: 3 pairs ABS/INC memory
Resolution switching
Simple calculation f(x)=Ax
Key lock
Calibration mode with signal output in Digimatic code format
Error alarm
MAX/MIN sample rate: 100 readings/s; max reading-change rate: 100 um/s

I/O:
External power: 5 to 24 VDC
Output load voltage: 5 to 24 VDC; max load current 100 mA
Input current: max 20 mA
Black: -V/GND
Red: +V
Orange: -NG output
Green: OK output
Brown: +NG output
Yellow: PRESET_RECALL/ZERO input
Blue: PEAK_START input
Shield: FG/GND earth
Measurement data cannot be output in normal signal-output operation.

Dimensions:
ASME/ANSI/AGD: stem Dia.0.375 in +0/-0.0012; body Dia.2.34 in; back Dia.2.13 and Dia.0.43 in; contact ball Dia.0.12 in; dimensions shown 0.30, 0.45, 0.52, 0.63, 0.79, 1.12, 1.46, 1.62, 1.97, 2.56 in; cable length 157 in; No.4-48UNF contact thread

Optional:
Lifting lever 21EZA198
Lifting knob 21EZA105
Pneumatic lifting attachment 903594 for 12.7 mm models; dust/water protection not guaranteed when lifting accessory used
Digimatic power supply unit 21EZA345A for calibration mode with i-Checker IC2000; connection cable 21EAA194 1 m or 21EAA190 2 m
Optional contact points and interchangeable back covers