Technical Data:
Series: 575
Type: LGS-1012P, Digimatic output type
System: Metric
Measuring range: 12.7 mm
Resolution: 10 um
Measuring accuracy at 20 degC: 15 um
Measuring force, contact point downwards: 2 N or less
Measuring force, contact point horizontal: 1.8 N or less
Measuring force, contact point upwards: 1.6 N or less
Position detection: ABSOLUTE electrostatic capacitance type linear encoder
Response speed: Unlimited; not applicable to scanning measurement
Output: Digimatic code
Protection rating: IP66
Mass: Approx. 190 g
Contact point: Dia.3 mm carbide tipped; fixing screw M2.5 x 0.45; standard contact point 901312
Stem: Dia.8 mm
Bearing: Plain type
Output cable: 2 m directly from main unit
Operating environment: 0 to 40 degC, RH 20 to 80%, non-condensing
Storage environment: -10 to 60 degC, RH 20 to 80%, non-condensing

Application:
ABSOLUTE encoder retains the reference point when power is switched off. Suitable for factory-floor use with protection against dust and splashing water.

Dimensions:
35 mm; 17.4 mm; 7.6 mm; 25 mm; 7.3 mm; overall reference 146.1 mm; 26 mm; reference 53.9 mm; 66.2 mm; 6.2 mm; 15.2 mm; 38.7 mm; stem Dia.8 mm tolerance 0/-0.008; rubber boot; additional drawing dimensions 37 mm; 8.6 mm; 20 mm.

Optional:
542-007A: EC Counter
542-072A: EH Counter
903594: Air lifter
02ADF640: SPC cable extension adapter
02ADD950: Extension cable for Digimatic gages, 0.5 m
936937: Extension cable for Digimatic gages, 1 m
965014: Extension cable for Digimatic gages, 2 m
238774: Rubber boot, spare
When connecting an extension cable, an SPC cable extension adapter is required.