Technical Data:
Series: 170
Model: i-Checker IC2000
Measuring range: 4 in / 100 mm
Resolution: 0.4 uin / 0.01 um
Accuracy at 20 deg C, vertical orientation: (0.1 + 0.4L/100) um, L = arbitrary length in mm
Accuracy at 20 deg C, lateral orientation: (0.15 + 0.6L/100) um, L = arbitrary length in mm
Feed speed: Maximum 10 mm/s
Drive method: Motor drive (semi-automatic / fully automatic)
Measuring unit: Separate type Linear Encoder
Measurement method: Semi-automatic measurement; fully automatic measurement when using an indicator equipped with data output function
Mass: 20 kg
Operating temperature: 20 deg C +/-0.5 deg C
Remarks: With 8 mm bushing and 3/8 in bushing

Content:
Dia.8 mm bushing
Dia.9.525 mm (3/8 in) bushing

Application:
High-accuracy continuous inspection of indicators.
Applicable to dial indicators, Digimatic indicators, bore gages, dial test indicators, linear gages and lever gage heads using various stem diameters and support systems.
Direct inspection stroke: Up to 4 in / 100 mm.
Semi-automatic mode positions an analog indicator pointer just before the measuring point.
Digital indicators with data output can be inspected automatically with spindle positioning and measurement-result recording.

Dimensions:
164 mm
Dia.200 mm
370.5 mm
189 mm
Dia.160 mm
559.5 mm
73 mm
79.5 mm
384.8 mm
Stroke: 100 mm
Standard accessory mounting diameter: Dia.8 mm / Dia.9.525 mm (3/8 in)

Remark:
Automatic measurement requires the indicator connection cable and the normally connected accessory required by the indicator.
An indicator measured via RS-232C can receive data from the main unit and output the counter value.
Recommended PC: PMICPU004
Recommended monitor: PMIMON003
Semi-Automatic Inspection of Analog Indicator uses automatic pre-positioning and jog-dial adjustment.
Fully Automatic Inspection of Digital Indicator automatically moves the spindle and acquires measurement data.
A simplified inspection certificate can be created, edited and printed; data can be saved as CSV.

Optional:
02ASK000: Test indicator attachment set, Dia.6 mm stem
02ASK180: Test indicator attachment set, Dia.8 mm stem
02ASK370: Test indicator holder, Dia.6 mm stem
02ASK380: Test indicator holder, Dia.8 mm stem
02ASU162: CG accessory set, type C, for bore gages; not compatible with IC1000 models
21CZB128: Dia.6 mm dovetail grooved stem
21CZB129: Dia.8 mm dovetail grooved stem
02ASK040: Stem bushing Dia.6 mm
02ASJ856: Stem bushing Dia.8 mm
02ASK150: Stem bushing Dia.8 mm, short
02ASL150: Stem bushing Dia.10 mm, short
02ASK050: Bushing Dia.9.5 mm; requires 02ASK070
02ASK060: Stem bushing Dia.12 mm
02ASK070: Stem bushing Dia.15 mm
02ASK080: Stem bushing Dia.20 mm
02ASK710: Stem bushing Dia.28 mm
02ASK090: Stem bushing 3/8 in
02ASK130: Stem bushing case
02ASK730: Reflector
937179T: Foot switch