Technical Data:
Series: 7
Product: Dial Gage Stand
Clamping range on column: 0 to 95 mm
Stem hole: Dia.8 mm with bush; Dia.0.375 in without bush
Anvil: Dia.58 mm flat anvil
Flatness of reference surface: 1.3 um or better

Content:
Standard anvil: 101461: Hardened steel flat anvil

Application:
Designed for comparison measurements of size using a dial indicator or Digimatic Indicator.
Vertical fine adjustment is available with one-touch control through parallel spring suspension.

Remark:
Perpendicularity of the stem hole to the anvil is better than 0.4 mm/100 mm.
When mounting high-accuracy Linear Gages with resolution 0.1 um or better, accuracy may be affected by mounting-hole perpendicularity to the anvil top surface due to cosine effect.
Compact dial indicators with bezel Dia.31 mm or Dia.36 mm are not suitable for use with this stand.

Dimensions:
Column: Dia.30 mm
Base / stand drawing dimensions: 50 mm; 160 mm; 45 mm; 205 mm; 80 mm; 168 mm; 110 mm
Anvil diameter: Dia.58 mm
Standard anvil drawing: Dia.58 mm; Dia.32 mm; SR20; 25 mm; 14 mm; 10 mm

Optional:
101463: Hardened steel domed anvil
Domed anvil dimensions: Dia.58 mm; Dia.32 mm; SR20; 26 mm; 14 mm; 11 mm