Technical Data:
Gear and bearing separator
Directly opposed drilled holes: 1/2"-13 UNC
Diagonally opposed threaded holes: 5/8"-18 UNF
Weight: 5.57 lb

Content:
J4332N - Hex Nut, 5/8"-18 UNF - Qty 4
J4332P - Separator Plate, Size #2 - Qty 2
J4332R - Threaded Rod, 5/8"-18 UNF - Qty 2

Application:
The 1/2"-13 UNC holes accept common 1/2 in cap screws and can be gripped with J4018 cap screw jaws
The 5/8"-18 UNF holes accept Press-N-Pull leg ends
Can be mounted on a shop forcing press to remove a bearing from a rear axle while supporting the bearing on the flat side of the separator plates

Dimensions:
Capacity: 4-3/8 in