Technical Data:
Modular clamping rail system SL120
Compact modular design
Maximum clamping force: 40 kN (9000 lbf)
Pairing accuracy: 0.03 mm (0.001 inch)
Precise serrations, pitch: 2 mm (0.08 inch)
Functional faces hardened and ground
Clamping force can be checked using a torque wrench
Graduated scale rule at top for quick positioning
Clamping rails can be coupled together infinitely
Weight: 25.5 kg (56.2 lbs)

Application:
Clamping of single and multiple components.
Bracing plates must be used when clamping a workpiece over two or more rails on the zero point clamping system.
Clamping rail may also be used pivotably; supporting plates are required for pivotable use.

Dimensions:
Nominal length=800 mm (31.5 inch)
Drawing overall length=799.7 mm
Overall width=120 mm
Mounting thread=M16
Locating bore=Dia. 18 H7
Upper counterbore=Dia. 38
Longitudinal hole-centre chain=99.85 / 100 / 100 / 100 / 100 / 100 / 100 / 99.85 mm

Remark:
May also be fastened without a zero point clamping system using M12 screws or on a T-slot table with the side clamp set.

Optional:
Supporting plates 24376 (2 units) for Dia. 120 mm clamping pot
Supporting plates 24379 (2 units) for Dia. 138 mm clamping pot
Bracing plates 24382 (2 units) for Dia. 120 mm clamping pot
Bracing plates 24383 (2 units) for Dia. 138 mm clamping pot